WPC (Wood Plastic Composite) wallboard is a new type of environmentally friendly building material produced from wood and plastic. WPC wallboard is widely used in home decoration and public decoration due to its advantages of anti-corrosion, waterproof, sound insulation, insulation and fire prevention. However, when using WPC wall panels, you also need to pay attention to some precautions to ensure its service life. This article will introduce the precautions for the use of WPC wall panels from the following aspects.
Storage and transportation
WPC wall panels need to be protected from moisture, direct sunlight and high temperature during storage and transportation. The density of WPC wallboard is low, and the surface is easy to wear and tear. Necessary protective measures should be taken during transportation, such as using cushions to protect the surface to prevent friction or collision of WPC boards.
Installation
Before installing WPC wall panels, it is necessary to carry out sufficient inspection and preparation work on the wall surface to ensure that the wall surface is smooth and clean. Go up the stairs, based on the first measurement, refer to the baseline, and place the elevation scale about 25 cm from the ground. During the installation process, the WPC wallboard needs to be firmly fixed with steel nails or stainless steel screws to avoid problems such as cracking of the wallboard caused by irregular fixing.
When using WPC wall panels, use professional installation tools and accessories, and avoid using too much force or too little force, which will affect the fixing effect, service life and appearance texture of wall panels, nails and screws.
Maintenance
The surface of WPC wallboard is difficult to be covered with paint, so it needs to be cleaned with water and soft cloth frequently during use and maintenance, and try to avoid using heavy corrosive cleaning agents. Remove stains and stagnant water in time. If there are slight flaws on the surface of the WPC wallboard, it can be polished and repaired with fine sandpaper to prolong the service life.
Environmental protection
In the production process of WPC wallboard, it is necessary to use non-toxic, environmentally friendly and biodegradable raw materials, and try to avoid the use of materials containing harmful heavy metals or VOC volatile organic compounds. In the production process of WPC wallboard, the generation of waste should be reduced as much as possible, the concept of green production, energy saving and emission reduction should be promoted, and the environmental impact should be reduced. When using WPC wall panels, we should pay attention to saving resources and reducing waste.
To sum up, WPC wallboard has the advantages of anti-corrosion, waterproof, insulation, and fire prevention. When using it, it is necessary to pay attention to maintenance, maintenance and other precautions in order to prolong its service life. When using WPC wall panels, you should choose the specifications and models suitable for your own use environment, and at the same time avoid the reduction of product quality due to incorrect use. During the production, use and disposal of WPC wall panels, we must also pay attention to reducing the impact on the environment.
